Suppliers with verified business licenses
Audited Supplier Standard:According to IEC61215, IEC61646 standard requirement
Purpose:to precondition the module with ultra-violet (UV) radiation before the thermal cycle/humidity freeze tests to identify those materials and adhesive bonds that are susceptible to UV degradation
Technical specifications:
1,Use material:can completely obstruct ultraviolet rays,tightness,good thermal insulation's high quality materials
2,Machine UV total irradiation area:more than 2000mm×2000mm,meanwhile satisfy 2 pcs module (2m×1m)
3,Light source life :system use Xenon lamp single lamp life is 1000 hours , delivery offer one set of spare part, use the life at above 2000 hours
4,Single lamp UVA and UVA relative energy rate:UVB approx occupy total energy 3%~10%
5,Irradiation strength:wavelength 280nm~385nm's irradiation strength can reach about 100W/m²,promise the test cycle reduce as far as possible
6,Irradiance uniformity:be better than ±15%
7,Real-time monitor and show UVA and UVB strength
8,UVA (320nm~385nm), UVB(280~320nm) Each one of the fiber optic probes
9,Module surface temperature:60ºC±5ºC
10,Temperature resolution:0.1ºC
11,Ozone: almost no ozone is produced
12,Light ways :upper light, module test plane vertical light source
13,Touch screen operate and real-time monitor , when reached the set value will automatic cut off the light source
14,Real-time figure show module surface temperature, measurement accurate±0.1ºC
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}