Photovoltaic module rupture tester/Module breakage test
Standard:
According to IEC61730-2004 standard requirement
Purpose:
This test is provide confidence that cutting or piercing injuries can be minimized if the module is broken
Technical specifications:
1,Impact height:300mm~1220mm
2,Device test frame
2.1,The inner dimension of test sample: according to customer's pv module size requirement
2.2,Sample frame material :channel width >=100mm, thickness 3mm
2.3,Installation the protection device at the both of side
3,Impactor
3.1,The mass of impactor:45.5 ± 0.5kg
3.2,Inner filling diameter 2.5-3.0mm's pellets
Impactor
1. The exterior of the bag according to the standard use the wrapped with tape
2. The inner filling diameter 2.5-3.0mm ( the material is pellets or steel ball )
3.The mass of impactor :45.5 ± 0.5kg
4. The ratio of widest diameter to height is between 1:1,5 to 1:1,4
Distance between the module surface and the bag:≤13mm
Distance between the module center and the bag:≤50mm
Safety Function
1. With the safety protection frame
2. Anti-secondary impact function
Testing parameter
1. Impact height: 300mm , 450mm, 600mm, 750mm, 900mm, 1200mm
2.Impact height display accurate: 0.1mm
3. Impactor rise ways: Automatic rise/ Jog rise
4. Release ways: arriving predetermined height, the cylinder automatic release
5. Real-time display rise height
6.The Remote control distance:≤10m
7.Touch screen control and display
About us:
Audited Supplier 
){kind=link}