Laboratory Electronics Washing Tester Lithium Ion Battery Washing Test Machine

• After-sales Service: 24 Hours Online
• Warranty: 1 Year
• Max Diameter of Workpiece: 650mm
• Model NO.: HT-CD-1110
• Mass Scope of Workpiece: 1000kg
• Type: Washing Testing Machine
• Load Way: Electronic Load
• Display: Digital
• Weight: 1000kg
• Power Source: AC380V
• Test The Outer Diameter of The Turntable: 500±10mm
• The Diameter of The Barrel in The Test: SUS316 650mm
• The Depth of The Barrel in The Test: 550mm
• Turnwheel Speed Range: 1~900 Rpm Is Adjustable
• Speed Error: ± 0.5% Rpm
• Servo Motor Power: 3.0kw
• Heating Pipe Power: 6.0kw
• Lift Power: 120W
• Pump Power: 100W
• Transport Package: Each Unit Is Protected with Foam and Film and Pack
• Specification: W1100*D1550*H1750mm
• Trademark: HOTOTECH
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200sets/Month

Product Description

Laboratory electronics washing tester lithium ion battery washing test machine



Product use:
Battery washing test machine utility model involves the technical field of battery test equipment, Specifically, a battery washing tester, The frame body is provided with a test box body, The lower part of the test box is equipped with a washing box, The test box is equipped with a rotating rotor, The inner side of the test box is equipped with a drying device, The input end of the rotating rotor connects the driving motor, The washing box is a box with a lifting structure, The washing chamber rise forms a sealed chamber with the upper edge of the test chamber, The frame panel is equipped with a control panel and a water tank, The washing box goes through the pipe with the water tank, Its structural design science, Solve the battery washing completely by manual step by step, Greatly shortened the test time, Improved the test accuracy, Save both time and effort

Structure of equipment:
1. Control system: PLC touch screen control
2. Mixing transmission system: the rotating mixing structure of the servo motor and the deceleration motor screw drive the mixing bucket are perfectly combined design; the battery automatically enters the drying box after stirring from the hot water
3. Stirring bucket: independent SUS316 acid-alkali resistant stainless steel heating mixing bucket: the bottom internal titanium alloy anti-rust heating pipe, the overall lifting control function
4. Drying system: independent SUS304 stainless steel hot air drying inner box. Built-in ceramic heating wire heating, motor wind wheel circulation hot air system
5. Solution recovery bucket: rear SUS316 acid and alkali resistant stainless steel water tank, can be used for the ratio of alkaline solution and solution recovery after the test
6. Drainage function: there is a manual ball valve at the bottom of the test machine. The ball valve can be manually opened to discharge the water in the recycling bucket to the outside
7. Auxiliary functions: with visual explosion-proof glass Windows, lighting, threshold protection, emergency stop protection function, equipment movement and fixed function

Satisfying standard:
GB 31241-2022 Safety Requirements for Lithium-Ion Batteries and Battery Packs for Portable Electronic Products

Product Parameter:

product model	HT-CD-1110
Test the outer diameter of the turntable	500±10mm
The diameter of the barrel in the test	SUS316 Stainless steel inner bucket diameter of 650mm
The depth of the barrel in the test	550mm
The center of the battery is high from the liquid level	300mm ± 10mm (set height set for different batteries)
Turnwheel speed range	1~900 rpm is adjustable
Speed error	± 0.5% rpm
Servo motor power	3.0kW
Heating pipe power	6.0kW
Lift power	120W
Pump power	100W
Solution temperature range	RT + 10ºC ~80ºC (adjustable)
Solution temperature deviation	±2ºC
Solution temperature to display the accuracy	0.1ºC
Solution temperature heating rate	RT + 10ºC to 45ºC was less than 40min
The drying temperature range	RT + 10ºC ~80ºC (adjustable)
Dry temperature deviation	±2ºC
Drying temperature display accuracy	0.1ºC
Heating rate of the drying temperature	The RT of ~ 45ºC was less than 10min
lighting	The test warehouse is designed with high brightness LED lighting, which is convenient to see the test conditions in the test warehouse
Safety protection design	Over-temperature protection; with leakage protection device, access control, safe emergency stop switch, three-color light alarm
Explosion-proof chain	The door is equipped with two explosion-proof chains to prevent the door from being blown up and hurting people.
device power supply	AC380V50HZ  19kW
outline dimension	W1100*D1550*H1750mm
weight of equipment	About 1,000 kg
headwaters	Tap water is required, with the interface of G1 / 2
drain off water	Drainage ditch G1 / 2

Company Profile: