Simulated Saline Solution Fog Test Machine Corrosion Tester Salt Spray Test Chamber

• After-sales Service: 24 Hours Online
• Warranty: 1 Year
• Max Diameter of Workpiece: 3000mm
• Model NO.: HT-CD-1131
• Mass Scope of Workpiece: 1000kg
• Type: Salt Spray Testing Machine
• Load Way: Electronic Load
• Display: Digital
• Control: Computer Control
• Weight: 7000kg
• Power Source: AC380V
• Outline Dimension: W2300*D5200*H3000 mm (in The Case of The Actual Si
• Temperature Range: 0ºC~+85ºC
• Temperature Fluctuation: ±0.5
• Temperature Departure: ±2
• Humidity Range: 20%-98%R.H
• Relative Humidity Fluctuation: ±3%R.H
• Cooling-Down Method: Forced Air Cooling
• Transport Package: Each Unit Is Protected with Foam and Film and Pack
• Specification: W2000*D3000*H2000MM
• Trademark: HOTOTECH
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200sets/Month

Product Description

Simulated saline solution fog test machine corrosion tester salt spray test chamber
Test objective:
Simulation battery package or system at a certain temperature, a certain pH and a certain concentration of salt spray environment to maintain for a period of time, the battery package or system will appear leakage, shell rupture, fire or explosion phenomenon, with the phenomenon structure as an important basis to judge its safety line. At the same time, the machine can also test the corrosion resistance of its products after electroplating, anode treatment, spraying, anticorrosion oil and other corrosion treatment on the surface of various materials. The machine adopts walk-in structure, and the test box has high explosion-proof performance and rapid fire extinguishing device, which can guarantee the test safety

Test procedure:
2.1. The test object is the battery pack or the system
2.2. Four test cycles according to GB / T 2423.18 Harness Level (5)
2.3. The salt solution is sodium chloride (chemically pure. Analytically pure) and distilled or deionized water configurations at a concentration of (5 ± 0.1)% (mass fraction).(20 ± 2) The PH value measured at ºC is between 6.5 and 7.2
2.4. Put the test object into the salt spray box and spray salt spray at 15ºC ~35ºC for 2h. After the spray, the test subjects were transferred to a damp heat box for 20h~22h, temperature (40 ± 2) ºC and relative humidity (90 ± 3)% into a cycle. This cycle was repeated three times and then stored for 3d in the test standard atmospheric conditions [temperature (23 ± 2) ºC, relative humidity 45%~55%] to form one cycle for four repeated cycles
2.5. Requirements: No leakage of the battery pack or the system. The shell rupture. Fire or explosion phenomenon

Product Parameter:

product model	HT-CD-1131
satisfying standard	GB 31467.3, etc
Internal box size	W2000XD3000XH2000     MM
outline dimension	W2300XD5200XH3000 MM (In the case of the actual size)
load capacity	1000 KG (customizable)
temperature range	0ºC~+85ºC
temperature fluctuation	±0.5
temperature departure	±2
Saline spray volume	1-2 mL / 80cm²1hr (collected for 16 hours and averaged)
Spray pressure	1.00±0.01kgf/cm2
resolution ratio	Temperature: 0.01ºC, Humidity: 0.01% R.H.
Humidity range	20%-98%R.H.
relative humidity fluctuation	±3%R.H
Poetic PH	Neutral 6.0 to 7.0 Acid 3.0 to 3.1
The PH value of the spray solution	Neutral 6.5~7.2 Acid 3.1~3.3
time frame	1S~9999H can be set arbitrarily
control method	The 7-inch TFT real-color LED LCD touch screen
Internal box material	Acid and alkali resistant material SUS316 # stainless steel iron fluorplating
External box material	Cold-resistant cold rolled steel plate spraying treatment
cooling-down method	forced air cooling
gross weight of equipment	About 7 tons
Total power supply for equipment	AC380V 50HZ 40KW
Other safety requirements	Explosion-proof and pressure relief system
	Spray fire extinguishing system
	Video surveillance system
	Smoke alarm system
	lighting system

Company Profile: