| After-sales Service: | 24 Hours Online |
|---|---|
| Warranty: | 1 Year |
| Type: | Testing Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Introduction:
The 4000 series harness comprehensive testing system is an instrument used for rapid inspection of harnesses, which can accurately detect open circuits, short circuits, and misalignment in the test harness, helping users quickly detect problems in the wiring harness. The equipment is combined with the supporting upper computer testing software to visually display the problems in the wiring harness.
Overview:
The HT4000-M series harness testing (cable testing) equipment supports mixed testing of two and four wires, integrating fast OS testing, four wire conduction testing, DCR testing, insulation testing, DC withstand voltage testing, ESD testing, NTP/PTC testing, and can be widely used for on-site analysis and testing of various harnesses and cables. DP4000-M has a maximum point count of 512 and can be used for distributed on-site testing of cable harnesses in industries such as aerospace, trains, and ships.
Characteristics:
Suitable for portable testing needs
Two four line mixed testing method, maximum utilization rate of testing points
Distributed testing can be conducted, and the point location can be expanded to over 20000
Test module board card design, easy to expand
The minimum resolution for conducting impedance testing is 100 μ Ω~1G Ω
Programmable high voltage source, 0~1000VDC
ESD component 1mA constant current excitation
The test points can be configured as excitation or sampling at any time
Technical Indicators:
| Model | HT4000-M | ||
| Measurement method | Mixed testing of two and four lines | ||
| Maximum number of test points | 512 | ||
| DC high voltage | 0-1000VDC | ||
| High voltage output accuracy | ±3% | ||
| High voltage measurement accuracy | ±3% | ||
| High voltage measurement time | 0.02-60 seconds (excluding user delay) | ||
| Low voltage measurement time | 0.02-60 seconds (excluding user delay) | ||
| OS measurement cycle | 500 μ S (1024 points, without considering user latency) | ||
| Test items and scope | Quick Short Circuit Test | 2kΩ-100kΩ | |
| Internal four wire conduction impedance | 0.1Ω-1MΩ | ||
| External four wire conductivity test | Test scope | 0.1mΩ-1MΩ | |
| Test current | ≤10mA | ||
| DC high voltage leakage current | 0.1μA-5mA | ||
| DC high-voltage electrical insulation | 1MΩ-1GΩ | ||
| Diode/Zener diode | Test scope | 0-10V | |
| Test signal | 1mA/10V | ||
| Short circuit endpoint judgment | Can determine the endpoint of a short section of road | ||
| Advanced feature project | Programmable continuous testing/automatic point finding/automatic diagnosis | ||
| Report function | WORD/PDF format report output | ||
| Storage memory | Up to 1000 sets of test setup files can be stored | ||
| Control Panel | System/Quick/Edit/Function Button Group | ||
| Sorting instructions | Pass/Fail | ||
| Size (mm) | 480*255*317 | ||
| Maximum weight (kg) | 20 | ||
){kind=link}