Simulated Battery Pack High-Altitude and Low-Voltage Environmental Testing High-Altitude Low-Pressure Test Chamber

• After-sales Service: 24 Hours Online
• Power Supply: AC380V6kw
• Certification: CE, ISO
• Warranty: 1 Year
• Overall Dimensions: W2400*D3300*H2800mm
• Gas Source: ≥0.6MPa
• Model NO.: HT-CD-1124-12m3
• Weight: About 6 Tons
• Pressure Range: 8.0 Kpa ~ Normal Pressure (Adjustable)
• Pressure Adjustment Accuracy: 0.1kpa
• Pressure Rise Time: Less Than 10min
• Data Line Interface: Group 2,8 Core Line
• Smoke Exhaust Pipe: Od φ 60mm
• Transport Package: Each Unit Is Protected with Foam and Film and Pack
• Specification: W2000*D3000*H2000mm
• Trademark: HOTOTECH
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200sets/Month

Product Description

Simulated battery pack high-altitude and low-voltage environmental testing high-altitude low-pressure test chamber


Product Overview:
The battery core in the battery pack is packed by the pressure around the standard atmosphere. Under normal circumstances, the internal and external pressure is basically balanced. When the battery pack is used on the plateau, due to the rise of altitude, the atmospheric pressure becomes lower. In this case, the battery pack may leak liquid and other phenomena. The simulated high altitude test box is to simulate the condition of the battery pack at high altitude and low pressure, and observe the safety performance of the battery pack. It is a special testing instrument for power battery pack and system safety test. It is the only choice for lithium battery pack manufacturers, electric vehicle manufacturers and scientific research and testing units

Equipment composition:
The high-altitude simulation test box is composed of box structure parts, vacuum pump system, measurement and control system, pressure relief device, camera monitoring system, safety protection system, etc

Satisfying standard:
 GB / T 31467.3-2015- -Lithium-ion Power Battery Packs and Systems for Electric Vehicles- -Part 3: Safety Requirements and Test Methods
 GB / T 31485-2015 Safety Requirements and Test Methods for Power Battery for Electric Vehicles

Product Parameter:

1.01 Product name	Simulated high-altitude test box
1.02 Product model number	HT-CD-1124-12m3
1.03 Test space	W2000*D3000*H2000mm
1.04 Material of the inner box	Q235B steel plate, thickness of 10mm + Q235B profile reinforcement and welding
1.05 Battery pack placement	The battery pack is placed directly on the bottom of the inner box, bearing 2000kg
1.06 Material of the outer box	Spray treatment of cold-rolled steel plate
1.07 Pressure range	8.0 kPa ~ normal pressure (adjustable)
1.08 Pressure adjustment accuracy	0.1KPa
1.09 Vacuum time	From the atmospheric pressure to the 11.3kPa for 30min
1.10 Pressure rise time	Less than 10min
1.11 System seal	No more than 1 kPa for leakage within 30min
1.12 High-voltage terminal post	Two groups, a total of 4, resistant to 400A, 1000V DC with a number identification to prevent errors
1.13 Low-voltage terminal post	Two groups, 4,20A, 60V DC 400A, 1000V DC; with number identification to prevent errors
1.14 Data line interface	Group 2,8 core line
1.15 Observation window	1.2 superposition of thickened tempered explosion-proof glass; prevent one cracked glass from being sucked into the box and causing safety accident; add a layer of explosion-proof glass to avoid this accident
	2. Window size: W400 * H400MM
1.16 Boxes of doors	(1) Size: about W2300XH2300mm
	(2) Manual opening and closing: the door is equipped with heavy load hinge and plane thrust bearing, reduce friction, open and close the door more easily
	(3) equipped with 2 sets of door locks: door lock in the form of pressing lock, manual switch more effort
1.17 video camera	Install a video surveillance camera from outside the window
1.18 Lighting lamp	1 high and low temperature explosion-proof lamp source LED lamp; power 50W
1.19 Overall dimensions	W2400*D3300*H2800mm
1.20 Total weight of the equipment	About 6 tons
1.21 Power supply	AC380V6kW
1.22 Gas source	≥0.6MPa
1.23 Smoke exhaust pipe	OD φ 60mm
1.24 Installation conditions	1. Ground load-bearing capacity of 1,500 kg/m²
	2. Laboratory space W6500 * D5000 * H4500mm
	3. Lighting system is installed in the laboratory with an illumination level of 200 lumens
	4. The laboratory is equipped with compressed gas sources
	5. The laboratory is equipped with smoke discharge pipe

Company Profile: