Solar Panel UV Preconditioning Test Environment Chamber Testing Machine with IEC61215-2: 2016

• Certification: CNAS
• Warranty: 2 Years
• Power: Electronic
• Product Name: Solar Panel UV Preconditioning Test Environment CH
• Testing Standard: IEC61215-2:2016 Testing Standard
• Irradiation Area: 2000mm*2000mm
• Model NO.: HTPV-15
• Testing Sample Quantity: 2 PCS
• Lamp Source Brand: Germany Honle
• Lamp Life: About 2000hours
• Irradiance Uniformity: Be Better Than 15%
• UVA Wavelength: 320nm~400nm
• UVB Wavelength: 280~320nm
• Module Surface Temperature: 60ºC±5ºC
• Electricity: 380V 60Hz
• Transport Package: Export Wooden Case
• Specification: Conform IEC61215-2: 2016
• Trademark: HOTOTECH
• Origin: China
• HS Code: 9013809000
• Production Capacity: 50 Sets Per Month

Product Description

Solar panel UV Preconditioning Test environment chamber testing machine with IEC61215-2:2016

Testing standard
It's according to IEC61215-2:2016 & IEC61730-2:2017 testing standard

Purpose
It's to precondition the module with ultra-violet (UV) radiation before the thermal cycle/humidity freeze tests to identify those materials and adhesive bonds taht are susceptible to UV degradation

The Mainly Features

The chamber material	Completely obstruct ultraviolet rays,tightness,good thermal insulation's high quality materials
Machine UV total irradiation area	more than 2000mm×2000mm,meanwhile satisfy 2 pcs module (Horizontal type placed)
Light source life	approx 2000 hours , the lamp amount 6pcs, the brand is Honle(Germany import)
Single lamp UVA and UVA relative energy rate	UVB approx occupy total energy 3%~10%
Irradiation strength	wavelength 280nm~400nm's irradiation strength can reach about 100W/m²,280nm~320nm <=10%,promise the test cycle reduce as far as possible
Irradiance uniformity	be better than ±15%
Data display	Real-time monitor and show UVA and UVB strength
UVA wavelength	320nm~400nm
UVB wavelength	280~320nm
Module surface temperature	60ºC±5ºC
Temperature resolution	0.1ºC
Ozone	almost no ozone is produced
Light ways	upper light, module test plane vertical light source
Control ways	Touch screen control
Electricity	380V 60HZ

Testing Procedure
1,Using the calibrated radiameter measure the irradiance at the proposed module test plane and ensure that at wavelength between 280nm and 400nm it does not exceed 250W/M2 (i.e. about five times the natural sunlight level) and that it has a uniformity of ±15% over the test plane

2,Short-circuit or attach the resistive load to the module and mount it in the test plane at the location selected , normal to the UV irradiance beam. Make sure that the module temperature sensors read 65±5ºC

3,Subject the modules front side to a total UV irradiation of at least 15 KW/m2 in the wavelength range between 280nm and 400nm with at least 3%, but not more than 10% in the wavelength band between 280nm and 320nm , while maintaining the module temperature within the prescribed range


Testing chamber's images display